What the renovation calculator works out
A renovation calculator is usually a planning tool for home improvement projects, and most in Australia try to estimate the renovation cost from the size of a room, the location and a finish level. This one starts from your builder’s quote instead. It adds your contingency, then checks the total against usable equity: 80% of what the home is worth, less what you owe. That 80% line is where lenders mortgage insurance starts, and Moneysmart says an LVR above 80% may mean paying it. The new loan is the old balance plus the total renovation costs, and the extra repayment is the difference at the same rate over the life the loan has left.
The default rate is 6.73%: the RBA’s average new owner-occupier variable rate for August 2026 plus the cash rate moves since (RBA table F6). Change it to yours.
Top-up or construction loan: where lenders draw the line
The size and type of the renovation project decide the loan, and each lender in Australia draws the line in its own place. Westpac says a loan increase can fund a renovation of $250,000 or less, and that a budget above that could go on a construction loan; it also says top-ups only work with variable rate loans and renovations that don’t involve construction (Westpac, using equity to renovate, checked 22 November 2026). ANZ puts structural work that typically needs council approval or a building permit on a construction loan (ANZ, renovating, checked 21 November 2026). That’s why the second box turns on either test.
The other side is clear too. CommBank’s construction loan guide says kitchen or bathroom upgrades and cosmetic changes like new flooring and paint don’t usually need a construction loan, and the money from a top-up may be paid in one lump sum. Structural changes are different (taking out walls, moving plumbing for a new bathroom, adding rooms), and the knock down rebuild guide covers the finance if you’re weighing a bigger job against starting again.
How a construction loan pays for a renovation project
On a construction loan the money goes to the builder, not to you. CommBank’s construction loan process guide (checked 22 November 2026) says the builder invoices as each stage is finished, you sign the invoice off and the bank pays it, with any money of your own spent first. While the loan is being drawn you pay interest only on the drawn amount, and each progress payment request carries a drawing fee that is added to the loan at the end. The final payment waits on an inspection that checks the work matches the approved plans.
So the extra repayment above is the end state, once every dollar is drawn, and the construction loan calculator shows the interest stage by stage. NSW law agrees: the NSW Government’s contracts page says progress payments should match work actually done, not time on the job, and caps the deposit at 10 percent.
The valuation differs as well. ANZ says a top-up valuation is done before any renovation begins, while CommBank arranges an ‘as if complete’ valuation at formal application, setting what the property will be worth once the work is finished. Until it arrives, that future figure is a guess.
What belongs in the renovation budget
The builder’s quote is the start, not the whole number. A quote prices the work inside the project scope, and plenty of a home renovation sits outside it: design and engineering fees, certifier or council fees, waste removal, appliances you buy yourself, and rent if you move out. CommBank’s construction guide says items outside the building contract, such as appliances or a pool, need formal quotes or receipts, or its valuation is done without them. Factor those expenses into the budget box too. Stamp duty isn’t one of them, because Revenue NSW charges transfer duty on a purchase or a transfer, and borrowing more against your own home is neither.
Older houses add their own risk to a renovation project. The wiring, the plumbing and any water damage sit behind walls nobody has opened yet, and NAB’s renovation page lists permits alongside labour and materials as costs to price before work starts.
Reading a renovation cost quote
A builder’s quote for a home renovation is built from labour, materials and fixtures, with the builder’s margin on top, and the features you choose sit inside it: tiles, flooring, paint, tapware, and roofing if the roof is part of the job. Two quotes for the same plans can be a long way apart because one builder has priced structural changes the other missed, such as moving plumbing or taking out a load-bearing wall, or because access to the site is harder than it looks. Asking for a price at two finish levels before you commit shows how much of the renovation cost is the finishes rather than the work.
Kitchens and bathrooms usually cost the most for their size, because they bring in the most trades, and moving fixtures to a new spot in a single room adds plumbing and tiling work on top.
A quote that leaves out site access or waste removal isn’t cheaper. It’s shorter.
Why the contingency line is there
Quotes cover what the builder can see. NAB’s renovation page tells owners to assume a project will cost more than expected and suggests a 10 to 20% buffer for surprises such as hidden water damage or delays (NAB, checked 21 November 2026). Our default is 15%, mid-range.
Our opinion, which some renovators will dispute: borrow the contingency up front, even if you never spend it. Unexpected expenses turn up after the lender has signed off on a figure, and asking for more money halfway through a job means a fresh application, a new valuation and a builder waiting to be paid, while the cheaper fix of an unused buffer can sit as savings in an offset account costing nothing.
What it can’t tell you
We can’t price building work. A broker has no business guessing the renovation cost of a house anywhere in Australia, from labour costs to construction materials, fixtures and tiles, so get multiple quotes from licensed builders and contractors and use the one you trust. The calculator also uses your value, not the lender’s. And it skips the lender’s assessment of your income, which our borrowing power calculator gives a rough view of.
Approvals sit outside it too: even exempt work has to comply with the National Construction Code, the NSW planning department says. Our usable equity calculator tests what a lower valuation does, and the upgrading page covers moving instead of renovating. This page is general information, not advice.